Explore Our Services

A sunny backyard with a white house, green lawn, colorful flowerbed, and black outbuilding surrounded by trees.
Inquire Now

What We Offer

Painting

Left side shows a white ceiling with five black light fixture openings and one vent opening. Right side shows a worker on scaffolding installing wooden ceiling panels in a room with windows, with plastic covering on lower areas. 
Included

  1. Protect floors, furniture, and surrounding areas

  2. Tape/mask edges, trim, and fixtures

  3. Prep surfaces (clean, scrape, sand as needed)

  4. Patch small holes and minor imperfections

  5. Caulk small gaps (trim/joints as needed)

  6. Prime repairs/bare spots as needed

  7. Apply 2 coats of paint to agreed areas

  8. Clean up and remove all masking/protection

  9. Final walkthrough and touch-ups

Sheetrock Hanging & Taping

Interior of a room under construction with drywall walls, ceiling, and window, with tools and supplies visible. 
Included

  1. Protect floors and surrounding areas (plastic/drop cloths)

  2. Remove loose/damaged drywall (as needed)

  3. Install new sheetrock (walls/ceilings as specified)

  4. Fasten properly to studs/joists

  5. Install/patch corner bead where needed

  6. Tape all seams and corners

  7. Apply joint compound (typically 2–3 coats)

  8. Sand between coats for a smooth finish

  9. Spot-prime repaired areas (so it’s paint-ready)

  10. Jobsite cleanup and debris removal

  11. Final inspection and touch-ups before paint

Power Washing

View of a wooden deck with black railing and gate, overlooking a grassy yard, with black and natural wood finish. 
Included

  1. Protect nearby landscaping and exterior fixtures as needed

2. Pre-rinse surfaces to remove loose dirt

3. Apply detergent/cleaner (house wash mix) where needed

4. Pressure wash exterior surfaces (as specified: siding, decks, patios, walkways, etc.)

5. Treat mildew/algae buildup (as needed)

6. Detail work on problem areas (stains, heavy buildup) where possible

7. Low-pressure rinse for a clean finish

8. Final walkthrough to confirm completed areas

9. Cleanup of surrounding area (rinse down plants, tidy hoses/equipment)

Wood Floors

Comparison of a room with a wood floor before and after refinishing. The left side shows a worker in a white shirt and mask using equipment, while the right side shows a clean, shiny wooden floor with no furniture or tools. 
Included

Site walkthrough + measurements

  1. Help selecting wood type/species, plank width, grade, and finish style

  2. Subfloor inspection (flatness, squeaks, moisture check) and prep recommendations

  3. Furniture move/protection plan (if offered)

  4. Removal and disposal of existing flooring (if selected)

  5. Subfloor prep: patching/leveling, underlayment/rosin paper, moisture barrier (as needed)

  6. Layout planning (direction, transitions, pattern details if requested)

  7. Installation (nail-down / glue-down / floating, depending on product)

  8. Cutting + fitting around doorways, vents, hearths, closets

  9. Install/replace trim: baseboards, shoe molding/quarter round (as needed)

  10. Transitions + thresholds (to tile/carpet/other rooms)

  11. Final walk-through, punch list, cleanup

Lead Removal Certified

Two workers in white protective suits restoring the exterior of an old, weathered wooden house, with one on a ladder working on the upper wall and the other on the ground handling tools and materials, surrounded by cleaning equipment and tarps.

On-site assessment to identify suspected lead-painted surfaces and define the work area

  1. Review of options: removal vs. encapsulation (seal) vs. enclosure (cover) depending on condition

  2. Safety setup and containment: plastic sheeting, sealed doorways/vents, warning signage, controlled access

  3. PPE and worker safety procedures (respirators, disposable suits, gloves)

  4. Lead-safe removal method selection (commonly wet scraping, chemical stripping, HEPA-assisted sanding) based on surface type

  5. HEPA vacuuming throughout the process to capture dust and debris

  6. Debris collection and secure bagging/labeling for disposal per local requirements

  7. Surface prep after removal: patching minor defects, sanding/smoothing (lead-safe), readying for primer/paint

  8. Final detailed cleanup: HEPA vacuum + wet-wipe/mop of all affected areas

  9. Post-work verification: visual inspection and cleanup checklist (and/or third-party clearance testing if requested)

  10. Documentation: description of areas addressed, methods used, and any next-step recommendations

Light Carpentry

Group of construction workers inside a partially built house, with exposed wooden beams and insulation, discussing during daytime with green landscape visible outside through large windows.

On-site assessment + measurements

  1. Minor wood repairs (rot/soft spots, small sections of trim/siding, corner boards)

  2. Trim work: install/replace baseboards, door/window casing, crown, shoe/quarter-round

  3. Drywall patch backing + small framing fixes (to prep for paint)

  4. Caulking + sealing around trim, windows, doors, and joints

  5. Door fixes: adjust sticky doors, replace hinges/handles, minor jamb/shim work

  6. Small exterior repairs: fascia/soffit touch-ups, porch rails, steps/treads (minor)

  7. Built-in/cabinet touch-ups: small panel repairs, replacing hardware, minor alignment

  8. Surface prep for painting (sanding, filling nail holes, priming repaired areas)

  9. Cleanup + haul-away of small debris (as specified)

Handyman Work

Modern kitchen with dark marble island, wooden cabinets, stainless steel appliances, and a adjacent dining area with beige chairs and a white wall 
Included

  1. On-site walkthrough + plan for the task list

  2. Minor repairs and fixes (indoor/outdoor) such as:

    • Patch small drywall holes, dents, and cracks

    • Caulking and sealing (tubs, sinks, trim, windows/doors)

    • Replace or repair trim, baseboards, and small wood sections

    • Adjust doors (sticking, latches, hinges), install handles/locks

    • Hang shelves, mirrors, blinds, curtain rods, TV mounts (client provides mount if required)

    • Install/replace hardware: cabinet pulls, towel bars, toilet paper holders

    • Replace light fixtures/fans/switches/outlets (where permitted and quoted)

    • Small exterior items: loose railings, shutters, minor fascia/soffit fixes, weatherstripping

    • Minor tile/grout touch-ups and small repairs

  3. Materials coordination: pick-up/ordering of basic supplies as needed (materials billed separately unless included)

  4. Jobsite protection + cleanup, debris removal for small items (as specified)

  5. Final walk-through + confirmation everything functions properly

Wallpaper Removal & Hanging

Interior of a room with wooden floors, white baseboards, and two windows. The left side has a patterned wallpaper with colorful illustrations and a teal wall, while the right side shows a plain white wall with floral wallpaper near the window. Both sides have radiator covers.

Wallpaper hanging - what’s included:

  • Site assessment + wall condition check (texture, prior paint, moisture issues)

  • Material review + layout planning (pattern match, seams, focal wall alignment)

  • Surface prep: light sanding/degloss as needed, patching small imperfections, caulking

  • Prime/size walls for proper adhesion (recommended)

  • Accurate measuring + cutting (including pattern matching and repeats)

  • Adhesive application (paste-the-wall or paste-the-paper depending on product)

  • Installation: smoothing, seam rolling, trimming at ceilings/baseboards/outlets

  • Detail work around corners, doors/windows, switches, vents

  • Cleanup of paste residue + jobsite cleanup

  • Final walk-through + care instructions

Wallpaper removal - what’s included:

  • Protect floors/furniture + containment for dust/debris

  • Identify paper type (vinyl, fabric, peel-and-stick, traditional) and choose removal method

  • Remove wallpaper and backing (scoring/steaming/solution as appropriate)

  • Adhesive residue removal + wall washing

  • Minor wall repairs: patching small tears/gouges, skim touch-ups where needed

  • Sand smooth + prime for paint or new wallpaper

  • Cleanup + disposal of removed materials

“Their attention to detail and commitment to quality truly stood out. We’ve already recommended them to others.”

– Former Customer

Get In Touch

If you're interested in working with us, complete the form with a few details about your project. We'll review your message and get back to you within 48 hours.

Otherwise, please feel free to call and/or email:

mmmpaintman@gmail.com

(845) 337-7835